Standpipe - Model 7000-13
Standpipe - Model 7000-13
Shown with optional tipping bucket.

 

 

FEATURES:

 

  • 10 ft (3 m) Mast Standard for Better Radio Paths
  • Multiple Uses
  • Sturdy Construction
  • Reduced Maintenance Effort Due to Elimination of Mounting Bolts

 


 

DESCRIPTION:

The Standpipe - Model 7000-13 can easily be installed by one person in 3 to 4 hours (depending on soil conditions). Typical Standpipe installations call for a round hole 2 ft (0.6 m) deep with a 2 ft (0.6 m) diameter. The standpipe is placed in the hole and secured in place with concrete.

The Standpipe is a good example of our goal to design equipment that provides long-lasting and reliable function while keeping installation, operation, and maintenance as quick and easy as possible. The current weatherproof Standpipe design is based on years of field experience of our engineers & technicians, and feedback from dozens of our client's field technicians and system operators.

      Standpipe DoorStandpipe Door

 

The standpipe includes a locking, quick disconnect top that can be attached or removed in seconds for easy top section connection. Three studs at the base of the top section drop into L shaped slots at the top of the standpipe and when the top section is rotated, it is secured into place. Then with the turn and removal of your key, your top section is secured from others removing it. Don’t worry about dropping a screw or wrench, a missing nut, or cross threading.

The 10 ft (3 m) steel mast provides much greater strength than an aluminum mast. This is particularly significant when a directional antenna is used in areas that experience high winds. The mast is attached by U-bolts to two brackets welded to the side of the standpipe, and the connection and cable entry are protected by a mast base cover. With the mast resting on the ground, the U-bolts can be put in place and tightened most of the way before being raised into position and tightened. This also allows readjustment of a directional antenna without the need to lower the mast. Installation and maintenance are easily accomplished by one person.

An optional access door with key lock can be purchased with or added to an existing standpipe to decrease maintenance time. The standard door is positioned 3.25 ft (0.99 m) below the top of the standpipe. The standpipe door opening is 22 inches (55.9 cm) high and 10 inches (25.4 cm) wide. This places the bottom of the door approximately 2.75 ft (0.84 m) above the ground after a typical installation of a standard 10 ft (3 m) standpipe. You can request that the standpipe door's location be moved if needed for your application.


 

SPECIFICATIONS:

Materials
     Standpipe ...........................   Powder coated aluminum (Patrician bronze or (optional) white)
     Antenna Mast ...........................   Steel
Antenna Cable Length ...........................   22 ft (6.7 m)
Antenna Mast Dimensions ...........................   10 ft x 1-1/4 in (3 m x 3.2 cm) (LxDia)
Standpipe Dimensions ...........................   10x1 ft (3x0.3 m) (LxDia)
Shipping Weight ...........................   60 Lbs (27.2 kg)

 

ORDERING GUIDE:
HSE Warranty
General Terms and Conditions

Model 7000-13 ......... 10 ft (3 m) Standpipe Section, Slotted. Includes Pull Rope, 7110-00 Omni Antenna, 7150-00 antenna Cable, Mast & Mast Cover. NOTE: Does not include Cap or Rain Gauge.      
Model 7000-14 ......... 10 ft (3 m) Standpipe Section w/Door, Slotted (Specify position on standpipe). Includes Pull Rope, 7110-00 Omni Antenna, 7150-00 antenna Cable, Mast & Mast Cover. NOTE: Does not include Cap or Rain Gauge.      

 

OPTIONAL:

Model 7000-02 ......... Extended Lengths of Standpipe (Price per Foot)      
Model 7000-03 ......... Door (Field Retrofit Kit)      
Model 7000-04 ......... Mounting Bracket, Standpipe (To Mount against Walls, Railings, Etc.)      
Model 7000-06 ......... Conduit Mounting Tab (For Conduit Hold-Downs)      
Model 7000-07 ......... Standpipe Door Gasket (5 Linear Feet)      
Model 7000-08 ......... Replacement Door w/Lock      
Model 7000-09 ......... Standpipe Base Guard, 16x15.25 inches (40.6x38.7 cm) (HxDia)      
Model 7001-00 ......... Spun Cap, for slotted standpipe      
Model 2400-15 ......... 1 mm Tipping Bucket Rain Gauge      
Model 2500-00 ......... 1 mm Electrically Heated Rain Gauge      
Model 2310-00 ......... All Season Precipitation Gauge      
Model 7105-04 ......... 7dB VHF High Gain Directional Antenna      

 

RELATED PRODUCTS:

5950 Series ......... Telemetry Cabinet
Model 3424-00 ......... Rain Gauge Station
Model 3225-00 ......... Electrically Heated Rain and Snow Gauge Station
Model 3451-00 ......... Packaged Weather Station
Model 3466-00 ......... Water Level Monitoring Station


 

SUPPORT:

Standpipe - Model 7000-13: Monterey County Application Story
Standpipe - Model 7000-13: Datasheet
Standpipe - Model 7000-13: Manual