Shaft Encoder - 6800 Series
Shaft Encoder - 6800 Series

 

 

FEATURES:

 

  • Low Power, Low Torque
  • All- Weather Enclosure for Easy Mounting
  • Accurate, Precise Measurements

 


 

DESCRIPTION:

The Shaft Encoder - 6800 Series are used to measure the rise and fall of liquid levels in various applications including stilling wells and stored bodies of water. The Shaft Encoders are available in 2 different configurations: the Model 6800-00 Stand Alone Shaft Encoder comes packaged in a small weather- resistant enclosure for mounting in a stilling well, and the Model 6800-02 Shaft Mounted Encoder, designed to mount directly on the shaft of an existing chart or punch tape recorder.

The Shaft Encoders features a low starting torque and a resolution of 100 counts per revolution. With a 1 ft (30.5 cm) or 1.5 ft (45.7 cm) circumference pulley attached, the shaft encoder can provide 0.01 ft accuracy and resolution. The shaft encoder's output can go directly to the Model 3500-00 Data Recorder.

Except for a solitary moving part, there are no electro-mechanical components or gears used in the Shaft Encoder's design. This results in an extremely reliable product with a long life expectancy and low power consumption.

The Shaft Encoder is powered by a regulated 5 VDC power supply and draws a 2mA of current. The Shaft Encoder's small size and low torque requirements make it ideal for sites which provide minimum space.


 

SPECIFICATIONS:

Range ...........................   Limited by Stilling Well
Accuracy ...........................   ±1 Increment
Sensitivity ...........................   0.01 ft w/100 Counts Standard (50, 100, 150 or 300 Counts per Revolution, Jumper Selectable)
Signal Output ...........................   HSE: Increment & Decrement Lines (or Sierra Misco Type Output)
Supply Voltage ...........................   5 VDC (12 VDC Optional)
Current Draw ...........................   2 mA
Sensor Cable ...........................   6 ft (1.8 m) Beldon Cable or 3 ft (0.9 m) Ribbon Cable for 3500 Data Logger
Starting Torque ...........................   .065 inch*oz (4.68 cm*g)
Shaft Diameter ...........................   1/4 in (0.64 cm) SS Standard, 1/2 in (1.3 cm) Hub (on Model 6800-00)
Shaft Mounting Hole ...........................   0.28 in (7 mm) Standard, 1/4 in or 9 mm Available (on Model 6800-00)
Dimensions ...........................   5.25x4.5x3.25 inch (13.3x11.4x8.3 cm)
Weight ...........................   11 oz (312 g)
Shipping Weight ...........................   2 Lbs (0.91 kg)

 

ORDERING GUIDE:
HSE Warranty
General Terms and Conditions

Model 6800-00 ......... Shaft Encoder (SA) w/6 ft (1.8 m) Beldon Cable
Model 6800-02 ......... Shaft Encoder (SA) Quadrature Output
Model 6801-00 ......... Shaft Encoder (SM) for A71 Chart Recorder w/3 ft (0.9 m) Ribbon Cable
Model 6810-00 ......... Shaft Encoder (SA) w/3 ft (0.9 m) Ribbon Cable
(SA) = Stand-alone, (SM) = Shaft Mount

OPTIONAL:
Model 6802-00 ......... Pulley - 1.0 ft (30.5 cm) Circumference
Model 6802-01 ......... Pulley - 1.5 ft (45.7 cm) Circumference
Model 6803-00 ......... Counterweight for a 4 inch (10.2 cm) float
Model 6804-00 ......... Stainless Steel Blank Float Tape for 6802-00 (1.0 ft (30.5 cm) Circumference) (Price per foot)
Model 6805-00 ......... Float - 4 inch (10.2 cm) Diameter
Model 5102-00 ......... Signal Cable, 5-Conductor (Price per foot)
Model 6808-00 ......... Servo Mechanical Interface (one 3 ft (0.9 m) chain & two gears)
Model 6812-00 ......... Encoder Calibrator & Display (Quadrature to 3206 Series)


 

RELATED PRODUCTS:

Model 6640-00 ......... Submersible Pressure Transducer
Model 6753-00 ......... Radar Level Sensor
Model 6830-01 ......... SDI-12 Optical Shaft Encoder
Model 6652-00 ......... High Accuracy Pressure Transducer
Model 6653-00 ......... Smart Gas Purge System


 

SUPPORT:

Shaft Encoder - 6800 Series: Datasheet
Shaft Encoder - 6810 Series: Manual