Antenna SWR Analyzer - Model 5515-00
Antenna SWR Analyzer - Model 5515-00

 

 

FEATURES:

 

  • Reads Antenna Standing-Wave Ratio (SWR)
  • Fully Portable
  • Built-in Frequency Counter
  • Simplifies Tuning of Antennas

 


 

DESCRIPTION:

The Antenna SWR Analyzer - Model 5515-00 is an easy to operate, versatile test instrument for analyzing nearly any 50 ohm radio frequency (RF) system on frequencies between 1.8 and 170 MHz and 415 to 470 MHz. In addition the Antenna SWR Analyzer can be used as signal source and as an accurate frequency counter. The Antenna SWR Analyzer gives you a complete picture of your antenna’s performance.

The Antenna SWR Analyzer - Model 5515-00 combines four basic circuits; a wide range oscillator, a frequency counter, a 50 ohm RF bridge, and a calibrated bridge unbalance indicator. The Antenna SWR Analyzer - Model 5515-01 is a compact battery powered RF impedance analyzer. The Antenna SWR Analyzer - Model 5515-01 combines five basic circuits; a variable oscillator, frequency counter, frequency multiplier, 50 ohm RF bridge, a twelve-bit A-D converter, and microcontroller.

This combination of circuits allows both models to measurement of the SWR (referenced to 50 ohms) of any load connected to the Antenna SWR Analyzer's ANTENNA connector. The Antenna SWR Analyzer's FREQUENCY switch selects frequency range. The Antenna SWR Analyzer performs a wide variety of useful antenna and RF impedance measurements, including antenna SWR, impedance, reactance, resistance, resonant frequency, bandwidth, coaxial cable length, velocity factor, approximate loss, and electrical distance to an open or short. The Antenna SWR Analyzers are portable and can be used with either an external low voltage supply, such an AC adapter or with internal AA battery packs.

The Antenna SWR Analyzers can also be used as a non-precision signal source. The Antenna SWR Analyzers provide a relatively pure (harmonics better than -25 dBf) signal of approximately 3 Vpp (approximately 20 milliwatts) into 50 ohm loads. The Antenna SWR Analyzer internal source impedance is 50 ohms. The Antenna SWR Analyzers are not a stable generator, but have adequate stability for non-critical applications such as alignment of broad bandwidth filters and circuits.

Primarily designed for analyzing 50 ohm antenna and transmission line systems, the Antenna SWR Analyzers also measure RF impedances between a few ohms and several hundred ohms. An easily accessed user controlled Zo setting in the Antenna SWR Analyzer's ADVANCED function menus allows changing SWR and other SWR functions (i.e. return loss, reflection coefficient, match efficiency, etc) to any normalized impedance value between 5 and 600 ohms.

  • Use the Antenna SWR Analyzer to find your antenna’s true resonant frequency. Trim dipoles and verticals.
  • The Antenna SWR Analyzer allows you to measure the distance in feet to a short or open in faulty coax. Measure the length of a roll of coax, coax loss, velocity factor, or impedance.
  • Measure your antenna’s 2:1 SWR bandwidth on one band, or analyze multiband performance from 1.8 to 170 Mhz with the Antenna SWR Analyzer.
  • Measure inductance and capacitance. The Antenna SWR Analyzer measures resonant frequency and approximate Q of traps, stubs, transmission lines, RF chokes, tuned circuits and Baluns.
  • The Antenna SWR Analyzer is a complete radio test station including - frequency counter, RF signal generator, SWR analyzer, RF resistance and reactance analyzer, coax analyzer, capacitance and inductance meter and more.

 

SPECIFICATIONS:

Frequency Ranges
     5515-00 ...........................   1.8 to 170 MHz
     5515-01 ...........................   1.8 to 170 MHz and 415 to 470 MHz
Frequency Counter ...........................   Selectable capture time of 25mS, 130mS, 1sec, or 10sec; resulting in resolution of 100 Hz, 10 Hz, 1 Hz, or 0.1 Hz
Displays ...........................   One LCD & two analog meters
Operating Voltage ...........................   11 to 18 VDC
Current Draw
     5515-00 ...........................   150 mA max
     5515-01 ...........................   150 mA max on VHF, 250 mA max on UHF
Power Connector ...........................   2.1 mm coaxial jack
Antenna connector ...........................   SO-239, BNC Female for frequency counter function
Dimensions ...........................   4.25x6.75x2.375 in (10.8x17.1x6 cm)
Shipping Weight ...........................   2 lbs (0.91 kg)

 

ORDERING GUIDE:
HSE Warranty
General Terms and Conditions

Model 5515-00 ......... VHF Antenna SWR Analyzer; Includes: Carrying Case and 12V Battery Harness
Model 5515-01 ......... VHF/UHF Antenna SWR Analyzer; Includes: Carrying Case


 

RELATED PRODUCTS:

Model 5512-00 ......... Adjustable Wattmeter
Model 5510-00 ......... Plug Wattmeter
Model 5500-00 ......... Digital Data Pumper
Model 7100-00 ......... Unity Gain VHF Omni-Directional Antenna
Model 7110-00 ......... 3dB Gain Omni-Directional Antenna
Model 7101-00 ......... Broadband Antenna
Model 7105-04 ......... High Gain Directional Antenna
Model 7127-00 ......... Yagi Satellite Antenna
Model 5526-00 ......... Portable Digital Pressure Indicator & Calibrator


 

SUPPORT:

How do you choose the right antenna cable for your application?
Antenna SWR Analyzer - Model 5515-00: Datasheet